Kearny & Trecker Parking Attachment Part 5
In this episode of the K&T parking attachment build, I take a drop of 4140 and machine it into the tube I need for the main body. This is all lathe work using the Monarch lathe. Facing, parting, turning, and drilling operations....
Kearny & Trecker Parking Attachment Part 7
In this episode of the parking attachment build, i weld the tube to the main body using both TIG and SMAW processes. Once cooled off I set it up in the K&T mill and bore the hole to final size....
Kearny & Trecker Parking Attachment Part 1
We begin the build of the parking attachment that holds the vertical milling head on the side of the Kearny & Trecker milling machine. I'll show you the material I have found to build it with, and begin the initial saw cuts and set up for some horizo......
Kearny & Trecker Parking Attachment Part 6
In this episode of the parking attachment build I use the K&T to drill and ream the holes needed for the pins i want to incorporate into the fit up for all the parts. Be sure to visit Johns channel and see how he's going to help with a part on this b......
Kearny & Trecker Parking Attachment Part 3
After welding the two steel plates together I decided I wanted to smooth out the material and make it look more like the original casting. So instead of grinding, or milling, I decide to make use of the 12" Sheldon Shaper and cut those welds down wit......
Kearney & Trecker Parking Attachment Part 12
In this episode we get the p/a welded together using both TIG and SMAW welding methods. After it's cooled down I use some blending and polishing wheels on the grinders to get it looking and feeling good.Abrasives used in this video:Weiler Wire Wheel......
Kearney & Trecker Parking Attachment Part 8
In this episode I get started on the heavy milling on the 3 1/4" square block, the part that will be welded onto the other end of the steel body. I use the K&T milling machine as well as some roughing endmills from Niagara Cutter and get the block mi......
Kearney & Trecker Parking Attachment Part 2
In part 2 of the parking attachment build, we put to use a roughing slab mill and do some heavy horizontal milling on the two steel plates. We also use an angular mill to machine a weld prep in the plates. Later I'll get the two welded together, usin......
Kearney & Trecker Parking Attachment Part 10
I continue on with the machining needed for the large steel block and ear that will be welded onto the main body of the parking attachment. Sometimes thing's don't always go as expected though. It's how we face our mistakes, handle them, learn from t......
Kearney & Trecker Parking Attachment Part 9
In this episode I continue on with the milling and machining needed on the steel block and weld-on ear that will all get welding onto the main body of the project. More K&T action, and we even let the DoAll get in on the work as well....
Kearney & Trecker Parking Attachment Part 4
In this episode of our parking attachment build, I finish the milling on the center body. We'll do some side milling with a 4-flute end mill, and then set up the boring head to machine a radius on the other end to allow a good fit on our 2 1/2" tube....
Kearney & Trecker Parking Attachment Part 13
This episode to get the 3/4" holes bored to size, and also the cross hole drilled for the tension pin. I'll show a new LED light i bought for machine use, we use a new keyless drill chuck for the first time that a viewer sent in, and I also try out t......
Kearney & Trecker Parking Attachment 14 Part 1
In this video we start the machine work on the threaded screw and three nuts needed that are used to hold the vertical head onto the parking attachment. I use some 1141 Stressproof cold rolled bar stock to machine the screw. We'll be indicating, turn......
Kearney & Trecker Parking Attachment 14 Part 2
In this video we finish the machining of the screw and hex. We also machine the brass hex nuts as needed to give the proper fit on the rotating arm....
Kearney & Trecker Parking Attachment 15 Part 2
In this video we finish the machining for the main pin for the K&T parking attachment. More lathe work, some draw filing, drilling of the pin hole in the DoAll mill, then we test fit on the machine housing.Next episode we should be mounting everythin......
Kearney & Trecker Parking Attachment 15 Part 1: Mounting Shaft
We begin the the machining on the last component of the build for the parking attachment. This is 1 3/4" 4140 alloy shaft that's turned down to fit both in the machine housing, and in the attachment main body. Video is split in two parts due to lengt......
Kearney & Trecker Parking Attachment 16: The Reveal!
OK guys, this is the one you have been waiting for. Will the parking attachment work?? I share with you the entire fit-up and trial process. I hit a couple minor snags along the way, but we quickly put those to rest and proceed to make this build a s......
Abom79 Parking Attachment! Part 1 Widget96
CNC Machining the Abom79 Parking Attachment part from a large piece of 1018 steel!Filmed with: http://amzn.to/1VRArQBhttp://amzn.to/1T1bZtIhttp://amzn.to/1smWq5uhttp://amzn.to/1WtLW0T & http://amzn.to/1TRjYsoGet Fusion360 at http://bit.ly/1qRKs2k !Su......
Abom79 Parking Attachment! Part 2 Widget96
CNC Machining the Abom79 Parking Attachment part from a large piece of 1018 steel!Filmed with: http://amzn.to/1VRArQBhttp://amzn.to/1T1bZtIhttp://amzn.to/1smWq5uhttp://amzn.to/1WtLW0T & http://amzn.to/1TRjYsoAdam has received the part! http://bit.ly......